Angle
|
<angle value> between 0° and 6°
- Sets angle
between connection End2 and body by inclining the branch for self aligning.
|
Bush Diameter
|
Positive <numeric value>
- Sets outside
diameter of the nut of bush.
|
Bush Type
|
-
1-HexagonalBush
-
2-OctagonalNipple
-
3-HexagonalNipple
|
Connection 1 | Length (L1)
Inlet | Length
|
Positive <numeric value>
- Sets straight
length at End1.
|
Connection 2 | Length
(L2) Outlet | Length
|
Positive <numeric value>
- Sets straight
length at End2.
|
Connection | End Type
|
fl
-<numeric value>
- Sets and sizes
end with a flange connection.
m
-<numeric value>
- Sets and sizes
end with a male connection.
fe
-<numeric value>
- Sets and sizes
end with a female connection.
Separate End Type entries for each End Spec with a semi
colon.
Example: fl-2;fe-.13 creates a flange at End1
with size 2, and a female connection at End2 with an overall reduction of
component's dimensions of .13
|
Female Connection Diameter
|
Positive <numeric value>
- Reduced branch
outside diameter (D2).
|
Inline Length
|
Positive <numeric value>
- Sets stud length
along End3.
|
Inlet | Outer Diameter
|
Positive <numeric value>
- Outside pipe
diameter of union fitting.
|
Male Connection Diameter
|
Positive <numeric value>
- Outside pipe
diameter (D1).
|
Nut | Diameter
|
Positive <numeric value>
- Sets the diameter
of the nut in fittings like union.
|
Nut | Length
|
Positive <numeric value>
- Sets the length
of the nut in fittings like union.
|
Nut Type
|
|
Outlet | Outer Diameter
|
Positive <numeric value>
- Outside pipe
diameter of union fitting.
|
Plug Depth
|
Positive <numeric value>
- Sets the depth of
plug head.
|
Plug Type
|
-
1-beadedsolid
-
2-solid
-
3-hollow
-
4-countersunk
For countersunk plug type the body encircles the plug head.
|
Plug Width
|
Positive <numeric value>
- Sets the width of
plug head.
The plug length is auto set to 10% of body length.
|
Radius
|
Positive <numeric value>
- Sets the bending
radius to the arc formed by given angle to an extended end of union.
|
Socket Type
|
-
1-TaperThread
-
2-ParallelThread
- Sets the socket
thread type.
|
Total Length
|
Positive <numeric value>
- Sets the overall
length of the fitting.
|