To Create a Report Component Formula
-
Select (Height)
These formulae display in the Formula list box as:
- H (height)
- VOL / SB (volume divided by surface bottom)
-
Calculate English unit quantification for a tile component installed along a 5 foot – 3 inch section of wall:Select in consecutive order, (Length Center), * (star operator), and enter 5.25 (5 feet 3 inches).
This formula displays in the Formula list box as:
- LC * 5.25 (length multiplied by 5 feet 3 inches)
-
Calculate Metric unit quantification for a tile component installed along a 1500 mm section of wall:Select in consecutive order, (Length Center), * (star operator), and enter 1.5.
This formula displays in the Formula list box as:
- LC * 1.5 (length multiplied by 1.5 meters)
-
Calculate English unit quantification for footings using an excavation component; where the footing is represented by a single line:Select in consecutive order, (Length Center), * (star operator), and enter 2.75.
Select * (star operator) again; and enter 2.33.
This formula displays in the Formula list box as:
- LC * 2.75 * 2.33 (length of the single line, multiplied by depth of the excavation, multiplied by width of the excavation).
-
Calculate Metric unit quantification for footings using an excavation component; where the footing is represented by a single line:Select in consecutive order, (Length Center), * (star operator), and enter 0.8 (meters).
Select * (star operator) again; and enter 0.6 (meters).
This formula displays in the Formula list box as:
- LC * 0.8 * 0.6 (length of the single line, multiplied by depth of the excavation in meters, multiplied by width of the excavation in meters).