Used to place symbols aligned to
2 selected points in the drawing. Especially useful when aligning symbols to
walls.
Accessed from:
- Ribbon:
Building Design >
Symbol gets placed at the first selected point. After selecting
the second point, the
Place Symbol dialog appears on the screen. Use
AccuSnap for precise placement.
Setting | Description |
---|
Select Symbol
|
Opens
Symbol Manager. Select symbol to place.
Symbol is shown as in preview box.
|
2D
|
Options for symbol placement in 2D.
- Symbol
insertion angle — Set insertion angle for symbols.
Options available:
- 0 degrees
- 90 degrees
- 180 degrees
- 270 degrees
- Rel.
Angle — Enter insertion angle manually. Also accepts negative (-)
degrees.
-
Offset X — Enter offset for symbol from
insertion point in X-Axis (horizontal).
-
Offset Y — Enter offset for symbol from
insertion point in Y-Axis (vertical).
- Flip — When
checked, flips symbol in opposite direction.
|
3D
|
Options for 3D visualisation of symbols.
-
Height — Enter 3D height manually.
-
Offset Y — Moves symbol 3D visualisation
Y-axis (vertical).
|
> Preview
|
Shows preview of symbol in the drawing with
selected settings. The dialog disappears momentarily. Click in the view
to return to the dialog.
|
> CAD
|
Inserts symbol into drawing.
|
Cycle
|
When checked, function repeats itself.
|
Cancel
|
Closes the dialog.
|
Key-in:
BESSYMALIGN2POINT