Blank column
|
This column contains the gusset plates at each
member starting with End 1, followed by vertical members V1, V2, etc, and
ending with End 2. Click the selection menu next to the V# field to open the
selection list. You make the selected member the same as the member in the
associated drop-down list by copying properties from other member.
|
Family Part
|
Sets the family and part of the gusset plate. Select
the Family Part values from the combo box opened by clicking the down arrow
next to the value field.
|
Top Plate
|
Columns to set top plate dimension data are
provided.
- Top
Thickness — Enter the thickness of the top of the current gusset
plate.
- Dimension
A — Enter the distance from the panel point to the left edge of the
selected top gusset plate.
- Dimension
B — Enter the distance from the panel point to the right edge of
the selected top gusset plate.
- Dimension
C — Enter the distance that is the height of the selected top
gusset plate.
|
Bottom Plate
|
Columns to set bottom plate dimension data are
provided.
- Bottom
Thickness — Enter the data for the bottom of the selected gusset
plate.
- Dimension
D — Enter the distance from the panel point to the left edge of the
selected bottom gusset plate.
- Dimension
E — Enter the distance from the panel point to the right edge of
the selected bottom gusset plate.
- Dimension
F — Enter the distance that is the height of the selected bottom
gusset plate.
|
On/Off
|
When checked, sets the gusset plate as
"on" which enables setting its parameters. When
unchecked, member parameters are displayed in grey.
|