| Angle 1 |
Positive <angle value>
- Sets angle between the first side branch (End3) and the main branch (End1 and End2) center line.
|
| Angle 2 |
Positive <angle value>
- Sets angle between the second side branch (End4) and the main branch (End1 and End2) center line.
|
| Branch Radius |
Positive <numeric value>
- Sets center line radii for cross side branches.
|
| Branch1 | Connection Length |
Positive <numeric value>
- Sets the straight length at End3.
|
| Branch1 | Outer Diameter |
Positive <numeric value>
- Sets the first branch (End3) outside diameter.
|
| Branch2 | Connection Length |
Positive <numeric value>
- Sets the straight length at End4.
|
| Branch2 | Outer Diameter |
Positive <numeric value>
- Sets the second branch (End4) outside diameter.
|
| Connection 1 | Bottom Inset |
Positive <numeric value>
- Sets the offset distance between the connect point at End1 (left side) and the side edge of the second branch (End4).
|
| Connection 1 | Top Inset |
Positive <numeric value>
- Sets the offset distance between the connect point at End1 (left side) and the side edge of the second branch (End3).
|
| Connection 2 | Bottom Inset |
Positive <numeric value>
- Sets the offset distance between the connect point at End2 (right side) and the side edge of the second branch (End4).
|
| Connection 2 | Top Inset |
Positive <numeric value>
- Sets the offset distance between the connect point at End2 (right side) and the side edge of the second branch (End3).
|
| Connection | End Type |
fl -<numeric value>
- Sets and sizes end with a flange connection.
m -<numeric value>
- Sets and sizes end with a male connection.
fe -<numeric value>
- Sets and sizes end with a female connection.
Separate End Type entries for each End Spec with a semi colon. Example: fl-2;fe-.13 creates a flange at End1 with size 2, and a female connection at End2 with an overall reduction of component's dimensions of .13
|
| Center to Branch1 Distance |
Positive <numeric value>
- Sets distance between main branch center line (End1 and End2) and side branch's (End3) male connection.
|
| Center to Branch2 Distance |
Positive <numeric value>
- Sets distance between main branch center line (End1 and End2) and side branch's (End4) male connection.
|
| Center to Inlet Distance |
Positive <numeric value>
- Sets distance between the End1 connect point and End2 center line.
|
| Inlet | Length |
Positive <numeric value>
- Sets the distance between the first side branch (End3) connect point and the main branch (End1 and End2) center line.
- Sets the straight length at End1.
|
| Inlet | Outer Diameter |
Positive <numeric value>
- Sets outside diameter of main pipe (End1).
|
| Length (L) / Total Length (L)
|
Positive <numeric value>
- Sets the length between End1 and End2 connect points.
|
| Outlet | Length |
Positive <numeric value>
- Sets the distance between the second side branch (End4) connect point and the main branch (End1 and End2) center line.
- Sets the straight length at End2.
|
| Outlet | Outer Diameter |
Positive <numeric value>
- Sets outside diameter of branch (End2).
|
