Create Slab by Flood
Identifies a delineated area within a shape or form, floods that area and extrudes the identified shape. Extrusion is upward, not downward, regardless of shape orientation; and the projection is smooth as opposed to faceted.
Accessed from:
Setting | Description |
---|---|
Height | Specifies the height of the area to be extruded, unless a shape or form above prohibits extrusion. If a shape above only partially blocks extrusion, Height controls the portion of the form that can be extruded past the overlying shape or form |
Offset | Sets a distance by which the extruded area is placed relative to the Depth Mode setting. |
Tolerance | Controls how many segments comprise a curve: Increasing the value creates fewer segments; decreasing the value creates more segments. |
Create In | When on, allows the extruded form to be created in the 3D Master model file when identified from a drawing or section file. (This setting is only available when identifying an area to extrude from an extracted drawing file.) |
Allow holes | When on, floods and extrudes around columns or other forms located within the selected area, and creates holes in the extrusion where the columns or other forms occupied space. |