Proj. Onto Plane Def. By
|
Controls the plane against which the element is
projected:
-
Shape – Defines a projection plane by a
shape.
-
3 pts – Defines an imaginary plane by
three points.
-
2 pts/view – Defines a projection plane
through two points and perpendicular to the view of the first point.
|
Tolerance
|
Sets the smoothness of the curve.
Tolerance is the maximum deviation between the
actual curve and the approximating line segments for the arc and curved
elements.
As you decrease the value in the tolerance field,
the curve becomes smoother.
|
Extrude
|
When on, links the vertices on the original element
with the projected vertices to generate a shape.
The first drawing is with Extrude turned off, and
the second drawing is with Extrude turned on.
Note: The Extrusion
Direction setting in the Offset/Direction Settings dialog controls the
extrusion direction:
- When on, extrudes
the element in the specified direction.
- When off, extrudes
the selected element in the direction perpendicular to the view.
|
Add Dropped Element
|
If on, adds an additional line to each edge of the
projected element.
|