In a view window, select the
Top View tool in the view control toolbox.
Either:
In
the
Analysis and Reporting ribbon tab, select
the
Substructure tool in the
Drawings group.
key in
bmreportreportsreffoldview
In the view window, data point on a substructure (pier or
abutment) object and the data point elsewhere to accept.
The
Create Drawing dialog opens.
Type a
Name for the drawing.
Select a
Drawing Seed.
Select an appropriate scale for the drawing mode.
Ensure that the
Create Sheet Model option is checked.
Click
OK.
A view opens with the dynamic view drawing
generated.
All drawings will be included in the
dialog. Either select
File > Models
or select the
Models tool found on the Primary toolbox ().
Tip: You can
return to the 3D bridge model by double-clicking the
“Default” model in this dialog.
The drawings will be automatically updated for most
changes. However, keep in mind that very large changes not work. For example,
changing a 20' pier to a 40' pier or deleting and adding piers will not update
the drawings.
Note: You turn off the
display of the section callouts generated by the dynamic views on the
dialog in the view window toolbox (). Clear the
Section Callouts display under the
Markers display control.
).
). Clear the
Section Callouts display under the
Markers display control.
