Place Wingwall tool
Used to place wingwall templates on abutments.
Found on the
Home ribbon tab in the
Substructure group.
To place the selected wingwall template onto an abutment, data point on the abutment.
Tool Settings
| Setting | Description | ||||||
|---|---|---|---|---|---|---|---|
| Place Left / Right Wingwall | Check the option for each side of the abutment (station ahead) where a wingwall is to be placed. | ||||||
| Template Name | Click
[?] to open the
Template Selection dialog, which
is used to select a wingwall template from the wingwall template library. Click
Select to use the selected template.
Tip: Hover the mouse pointer over the
field to see the name of the currently selected template in the tool tip.
|
||||||
| Orientation | Select how this wingwall is placed with respect to
the abutment:
|
||||||
| Vertical Offset | Vertical distance from the abutment to the top of the wingwall. A positive number results in the top of wingwall above the top of the associated abutment. A negative number pushes the wingwall top below the abutment top. | ||||||
| Align With Abutment | Check this option to align the outside face of the abutment to the outside face of the wingwall. | ||||||
| Longitudinal / Horizontal Offset | Type an offset from the end of the abutment to the
wingwall.
Note: This value is
automatically calculated if you select the
Align With Abutment option.
|
||||||
| Skew Angle | Type a skew angle to use to rotate the wing wall with respect to the abutment orientation. | ||||||
| Adjust Height to Backwall | Select this option to adjust the height of the wingwall to match the abutment backwall. | ||||||
| Compute Length | (Normal/Skewed wingwall) Set this option and specify the Fill Slope, Berm Horizontal Offset, Berm Vertical Offset, and Length Extension. | ||||||
| Material group | Select the material to use for object components by selecting the associated [?] button and then selecting the material from the dialog. | ||||||
| Feature group |
|
Key-in: