OpenBridge Modeler – Help The RibbonHome Ribbon TabSuperstructure Superstructure Place Deck toolUsed to place a deck template over supportlines. Place Advanced Deck toolUsed to place a deck template between supportlines for a cast-in-place box bridge. Assign Superelevation toolUsed to assign a superelevation section to a bridge deck. Place Beam Layout toolUsed to layout beam lines for spans between supportlines. Place Beam Group toolUsed to select a beam definition for a beam layout. Place Transverse Stiffeners toolUsed to add transverse stiffeners to a steel girder superstructure. Place Cross Frame tool Used to add steel cross frames to concrete or steel girder superstructure. Place Diaphragm for Concrete BeamsUsed to add concrete diaphragms between beams on concrete girder and slab type bridge. Place Shear Studs Place Field Splice Place Segmental Span toolUsed to place segmental bridge units span-by-span. Place Cantilever Segmental toolUsed to place a balanced cantilever segment from a template. Close Segmental Balanced Cantilever toolUsed to automatically place cast-in-place closures between all free cantilever ends on a balanced cantilever bridge unit. Segmental Cantilever Report toolUsed to generate an on-screen report of the balanced cantilever segments in each span of the active bridge unit Constraints toolOpens the Edit Constraints dialog, which contains a list of all templates used in the segmental bridge and a link to edit the constraints for each.