| When checked, a standard stiffener will be created on the other
side of the web if there is only one connecting shape selected.
Note: Activated when you have only one connecting shape and one
support shape.
-
Stiffener
Type ? Creates stiffener plate of selected type: Chamfered,
Rounded, or Filleted.
-
Flange
Offset ? Sets the distance from stiffener edge to flange of the
support shape.
-
Web
Offset ? Sets the distance from stiffener edge to web of the
support shape.
-
End
Offset ? Sets the distance from stiffener end to support shape
edge.
-
Thickness ?
Sets the thickness of the stiffener plate.
-
Radius ? Sets
the stiffener fillet radius or chamfer size.
|
