Wrap Around Gusset - Gusset Parameters tab
| Setting | Description |
|---|---|
| Gusset Thickness | Sets the gusset plate thickness selected from the drop-down list. |
| Other Side | When checked, enables other (back) side settings.
Note: The front side
is denoted "S1" and the back side "S2", corresponding settings on the dialog
are listed in the left column and right column respectively.
|
| Work Offset 1 / Offset 2 | Indicates the working offsets at side 1 and side 2. |
| Gap to S1 / S2 | The gap between the plate edge and support 1 and at support 2, respectively. |
| PL. Cut Gap 1 / Gap2 | The gap between the plate and the cut shape at support 1 and support 2, respectively. |
| Clip Set1 Front / Back | The distance between from clip and plate edge at front and back side of support 1. |
| Clip Set2 Front / Back | The distance between from clip and plate edge at front and back side of support 2. |
| Domi Angle 1 / Angle 2 | The angle between the brace 1 and support 1; and between brace 2 and support 2. |
| B1 Offset 1 / Offset 2 | The side offsets at brace 1. |
| B2 Offset 1 / Offset 2 | The side offsets at brace 2. |
| Distance B1 to S / B2 to S | The distance between nearest the brace edge and the support at support1 and at support 2, respectively. |