Hallow Shape Bracing - Tie Plate tab

Setting	Description
Tie Plate	Side Selection ? Sets side, either Side1 or Side2 of the plate. Thickness ? Sets the thickness of the tie plate.
Longitudinal Spacing	Number ? Sets the number of bolts to be placed on the X axis. Edge Distance (w1) ? Sets the distance from the start of the shape to the center of the first bolt. Inner Distance (w2) ? Sets the distance from the end of the shape to the center of the last bolt. Distance Between (w3) ? Sets the distance between the center of the bolts. Note: Enabled for more than one Number of bolts. Slot Length ? Sets the slot length.
Transverse Spacing	Number ? Sets the number of bolts to be placed on the Y axis. Edge Distance (G1/G2) ? Sets the distance from the edge to the center of the first bolt. Distance Between ? Sets the distance between the center of the bolts.
Bolts	Bolt Type ? Sets the bolt style from the drop-down list. Bolt Diameter ? Sets the hole diameter of the selected bolt from the drop-down list of bolt diameter table. Workloose ? Sets the hole clearance of the desired drill holes, which usually consists of 2 mm. Additional Length ? Sets an additional length to the bolts extension outside the nut. Turn Bolt ? When checked, the bolt direction is inverted.
Weld	When checked, enables the weld settings: Weld Gusset Side ? When checked, welds at gusset side. Weld Brace Side ? When checked, welds at brace side. Weld Style ? Sets the kind of weld seam selected from the list of available weld styles. Thickness ? Indicates the thickness of the selected style of the weld seams.