Wrap Around Gusset - Support 1/2 Clip Angles tab

Setting Description
(Angle Settings)
  • Angle on Side 1 ? When checked, applies clip angle on side 1.
  • Angle on Side 2 ? When checked, applies clip angle on side 2.
  • Flip Angle ? When checked, reverses the angle.
(Shape Settings)
  • Catalog ? Sets the shape catalog from the drop-down list.
  • Section Size ? Sets the section size from the drop-down list.
Longitudinal Spacing
  • Number ? Sets the number of bolts to be placed on the X axis.
  • Edge Distance (w1) ? Sets the distance from the start of the shape to the center of the first bolt.
  • Distance Between (w2) ? Sets the distance between the center of the bolts in longitudinal direction.
  • Edge Distance (w3) ? Sets the distance from the end of the shape to the center of the last bolt.
  • Slot Length ? Sets the slotted hole distance along longitudinal direction.
Gusset Side / Support Side Transverse Spacing
  • Number ? Sets the number of bolts to be placed on the Y axis.
  • Edge Distance (g1) ? Sets the distance from the edge to the center of the first bolt.
  • Distance Between (g3) ? Sets the distance between the center of the bolts.
Gusset Bolts / Support Bolts
  • Bolt Type ? Sets the bolt style from the drop-down list.
  • Diameter ? Sets the hole diameter of the selected bolt from the drop-down list of bolt diameter table.
  • Workloose ? Sets the clearance between bolt and hole diameter.
  • Additional Length ? Sets an additional length to the bolts extension outside the nut.
  • Flip ? When checked, the bolt direction is inverted. Available when not welded.
  • Weld ? When checked, the shapes are welded, instead of bolting.