Stiffener Connection - Stiffeners Edge tab

Used to set the type of cut for the edge of the Stiffener Plate.

Setting	Description
Shape Cuts	Cut Top to Stiffener ? When checked, cuts the top flange to stiffener Both Sides ? Enabled for Cut Top to Stiffener. When checked, cuts the top flange on both sides. Cut Bottom to Stiffener ? When checked, cuts the bottom flange to stiffener Both Sides ? Enabled for Cut Bottomto Stiffener. When checked, cuts the bottom flange on both sides.
Stiffener Cut	Square / Tilted Cut at Start ? When checked, the Start cut of stiffener is tilted or squared, instead of round. Square / Tilted Cut at End ? When checked, the End cut of stiffener is tilted or squared.
Upper Edge / Lower Edge	Enabled when Cut Top to Stiffener is unchecked. Chamfer ? When checked, the respective option sets the type of cut for the corner of the Stiffener Plate. Rise / Run ? Sets the rise and run distances relating to the cut. Fillet ? When checked, the respective option sets the type of cut for the corner of the Stiffener Plate. Radius ? Sets the radius of fillet curve. Max ? When checked, the maximum distance for the cut is calculated and implemented.