Plate Funnel Enhanced - General Options tab

Used to define the dimensions and offsets of enhanced plate funnel.

Setting Description
General Constraints (Inside Dimensions)
  • A (Dim) ? Sets the height for the vertical plate at the top of the plate funnel.
  • B (Dim) ? Sets the height for the vertical plate at the bottom of the plate funnel.
  • Int Height ? Sets the vertical height of the plate funnel, excluding dimension A or B.
  • O/A Height ? Display the overall height of the plate funnel. The sum of above heights; A + B + Int Height.
  • Wall Thick ? Sets the thickness of all plates around the plate funnel (includes vertical and sloping plates).
Offsets and Rotations
  • X Offset ? Sets the offset in the length direction. This value can be negative or positive.
  • Y Offset ? Sets the offset in the width direction. This value can be negative or positive.
  • X & Y Offset Sym ? When checked, equates the X & Y offsets, keeping both offset values same.
  • Rotation Angle ? Sets the rotation angle of bottom opening.

    The increment [+] or decrement [-] buttons step up or step down the rotation angle by the value set in the Rotation Angle Increment.

  • Rotation Angle Inc ? Sets the angle increment factor for rotation angle to increment [+] or decrement [-] in each step. This can only be a positive value.