Ladder - Wall Mounting tab

Used to add a wall fastening to the ladder.

The wall mounting settings enable only after checking the Wall shape.

Setting	Description
Wall shape	When checked, enables the shape controls. The shape type and class selection lists provide option to set. All shape attributes are available for selection. Shape type ? Sets the shape type for the wall connection (standard, user shapes, etc.) Shape class ? Sets the shape type for the wall connection. Class list varies based on the shape type selection. Shape size ? Sets the shape size for the wall connection. Size list varies based on the shape class selection.
Position	Sets the positioning of the wall connection according to the cross beam. Inner Eedge ? Inserts the wall shape at the inner edge of the upright and shows to the inside. Centered ? Inserts the wall shape in axis position on the height of upright axis. Outer edge ? Inserts the wall shape at the outer edge of the upright and shows to the outside.
0 Degree	Sets the wall shape rotation. Rotates the shapes around their insertion axis (in increments of 90?).
Mirror	When checked, mirrors the wall shape along Y-axis, before insertion.
Distance to wall	Sets the distance between upright axes and wall surface where the ladder has to be mounted.
Distance to floor	Sets the distance between the axis of the first wall shape and the ground area of the ladder.
Distance between	Sets inner spacing of wall connection, as the desired distance of the wall shapes. The program divides the distances between the first and last wall shape regularly according to this specification and the values are rounded up or down correspondingly.
Top distance	Sets the distance between the axis of the last wall shape and the climbing out area of the ladder. This is the distance the end of wall connection seen from the top of the ladder.