Detail Style-Dimensioning - Common-Distances tab

Setting	Description
Dimensioning Area	In the selection list you choose the dimensioning area you want to work on. The current values are entered in the input fields on the right.
Selection List	Global Area ? The global outer area of dimensioning. Local Area ? The local inner area of dimensioning; as vertical dimensions of a component part group are always local, they are controlled here as well.? Sloped Area ? The local inner area of dimensioning at aligned dimensioning. Individual Dimensions... ? The different inner areas at individual dimensioning within component part groups, etc. Manual Dimension Points ? The areas of manual dimension points.
Distances	Most data can be indicated here independently for horizontal, vertical and inner dimensioning direction. The fields on the left correspond to horizontal direction (main direction), the fields in the middle correspond to vertical direction (transversal direction), the fields on the right correspond to inner direction (independent direction).
1st Dimension?Line	Here, you enter the distances from the outer limit of the component up to the 1^st dimension line.
Between the Dimension Lines	Here, you enter the distance between the individual dimension lines of an area succeeding the first line.?
XLines to Object	Here you enter the distance from the start of construction lines up to the outer limit of the component or of the dimensioning area in question. Entering the value 0 will not cut the construction lines at the edges but they are extended to the corresponding points to be dimensioned. If you selected ?Fixed XLine Length? option, the meaning of the fields changes, and you enter the length of the dimension construction lines.
XLines to Dimension Lines	Here you enter the distance of the construction lines of a successive chain up to the previous dimension chain. Entering the value 0 will not cut the construction lines at the previous dimension chains but they are extended to the outer limit of the component or of the corresponding area to be dimensioned.
Edge Distance Horizontal	Here you indicate the minimum distance hole group dimensioning or subpart dimensioning may have up to the end of the component before it is moved to the outside.?
Fixed XLine Length	If this field has been checked, the construction lines have exactly the length specified in the input fields ?Length of Construction Lines?. If this field has not been checked, the dimension chains are cut at each other with the distances indicated in the distance fields.
Dimension Table	In the table, you see a survey on all available settings to be able to control them at a glance. Information about horizontal and vertical dimension is summed up (Horizontal/Vertical). Rows ? the different parameters for setting. Columns ? the different dimensioning areas.

Please refer to the corresponding chapters of the introduction to dimensioning for the meaning of the different dimensioning areas and of individual dimensioning (nested dimensioning).