Bent Plates

Used to add edged or bent segments to the plate. The result is a three-dimensionally bent plate which however is representing a single component part and which can be depicted as flat via unfolding.

• the Bend button is selected in the Plates/Polyplates dialog, or
• the Add Flanges tool is selected, or
• ProStructures > Plates > Add Flanges is selected, or
• the command PS_ADD_PLATE_FLANGE is entered.

Dialog Controls

Setting	Description
Favorites	Current Settings - Select when you haven't created any template and you want to use the current settings of the dialog instead. Bentley/Default - Select when you want to use the application default settings template and you don't want to use the current settings of the dialog instead.
OK	Closes the dialog and save your changes.
Cancel	Closes the dialog without saving changes.
Help	Opens online help.
Template	Saves and retrieve settings to be used on other projects.
Add flange segment	Adds a new plate edge to the plate. Click on the plate at the desired reference edge of a plate segment. This determines the alignment of the new segment. The new plate segment is always subordinate to the reference segment. If the reference segment is modified later, the new segment is also modified.?
Remove flange segment	Removes an existing plate segment (including all subordinate segments). Click on the plate segment at any edge.
Modify flange segment	Modifies an existing plate segment later. Click on the plate segment at any edge. Any subordinate segments of this plate segments are also modified.
Check Bent Plate	Check successful unfolding of an existing bent plate for any errors. Click on the bent plate at any edge.
Show /Hide Preview	Opens or closes, respectively, a flyout panel to display an illustration based on the tool.