Element Modification - Options tab

Setting Description
Multiple object selection
  • Cut at line - You can cut several parts simultaneously at one line without having to select the function once again.
  • Cut at part - You can cut several parts simultaneously at another part without having to select the function once again.
  • Divide - You can divide several parts simultaneously without having to select the function once again.
  • Polycuts - You can cut an object simultaneously at several poly-lines without having to select the function once again.
Execute in loop
  • Cut at line - The “Cut at Line” command is repeated until it is explicitly interrupted.
  • Cut at part - The “Cut at part” command is repeated until it is explicitly interrupted.
  • Divide - The “Divide” command is repeated until it is explicitly interrupted.
  • Connect - The “Combine Shape” command is repeated until it is explicitly interrupted.
  • Shorten - The “Shorten Shape” command is repeated until it is explicitly interrupted.
  • Lengthen - The “Extend Shape” command is repeated until it is explicitly interrupted.
  • Polycuts - The “Polygonal Cut-Outs” command is repeated until it is explicitly interrupted.
  • Miter cuts - The “Mitred Cut” command is repeated until it is explicitly interrupted.
  • Insert corner - The “Insert Corner” command is repeated until it is explicitly interrupted.
  • Delete corner - The “Delete Corner” command is repeated until it is explicitly interrupted.
  • Place Chamfer - The “Place Chamfer” command is repeated until it is explicitly interrupted.
  • Round Edge - The “Round Edge” command is repeated until it is explicitly interrupted.
End dialog automatic When on, the dialog is immediately closed after an action.