Connections Resistant to Deflection
Note: Visit
OpenBridge Modeler
's Bentley Communities for more
information on how to create the connections database.
| Setting |
Description |
| Tensile, Shear, Moment
|
Here, you enter a maximum load for the connection (in
KN) for the corresponding load type. In the list, only the connections suitable
for these loads are displayed.
|
| Table columns
|
Meanings of the list entries:
-
Label - Lists
the standard designation of the connection
-
Width - Lists
the width of the plate (parallel to the flange of the connecting shape).
-
Thickness -
Lists the thickness of the plate.
-
Length - Lists
the length of the plate (parallel to the web of the connecting shape).
-
Horizontal -
Lists the number of drill holes in direction of the plate width.
-
Vertical -
Lists the number of drill holes in direction of the plate length.
-
bolt
Dia. - Lists the used bolt diameter.
-
Bolt - Lists
the used bolt type.
-
Stiffener -
Lists the additional stiffeners are required for this connection.
-
Backer
Pl. - Lists the additional backer plates are required for this
connection.
-
Top
Offset - Lists the top offset for this connection.
-
Bottom
Offset - Lists the bottom offset for this connection.
-
Af - Lists the
thickness of the weld seam at the flange.
-
As - Lists the
thickness of the weld seam at the web.
-
Tensile,
Shear, Moment - Lists the maximum loading of the connection.
|
Shear Force
Connections
The meaning of the list entries corresponds to those for
connections resistant to deflection so that you can refer to this chapter for
information.
