NC Data - Data - DXF Options tab

Used to specify the layer names and the colors for the DXF-output of plates.

Used to set DXF output style.
Setting Description
Contour level and Color Name of the outer contour level and color number of the level.

Default values: Level = 0, Color = 7

Inner contour level and Color Name of the inner contour level and color number of the level.

Default values: Level = 0, Color = 7

Horizontal Hole level and Color Name of the horizontal holes level and color number.

Default values: Level = 0, Color = 7

Vertical Hole level and Color Name of the vertical hole level and color number.

Default values: Level = 0, Color = 7

Text level and Color Name of the text level and color number.

Default values: Level = PS_TEXT, Color = 7.

Text Height Sets the Height of the output text of line1 and line2

Default value: 1/8" (Imperial units), 3mm (Metric units).

Decimal Points Defines the number of exported digits after the decimal point of the DXF output. This influences the accuracy of the exported DXF files.

Default value: 4.

Line1/2 Any additional text which is written into the output file (Bottom corner on the left of output, and above Additional Lines); wildcards may be used.
The list of wildcards is as follows: 
%DAY%file creation date
%MONTH%file creation date
%YEAR%file creation date
%HOUR%file creation time
%MINUTE%file creation time
%DWG_PROJECT_NAME%Project name
%DWG_ORDER_NAME%Order name
%DWG_PROJECT_NUMBER%Project number
%DWG_ORDER_NUMBER%Order number
%DWG_DRAWING_NAME%Drawing name
%DWG_DRAWING_NUMBER%Drawing number
%DWG_DRAWING_INDEX%Drawing index
%DWG_CREATED_NAME%Created by
%DWG_CREATED_DATE%Created on
%DWG_CHECKED_NAME%Checked by
%DWG_CHECKED_DATE%Checked on
%DWG_CLEARED_NAME%Cleared by
%DWG_ CLEARED _DATE%Cleared on
%DWG_LVPOS1%LV Pos1
%DWG_LVPOS2% LV Pos2
%DWG_LVPOS3% LV Pos3
%DWG_LVPOS4% LV Pos4
%DWG_COMMENT1%Comment1
%DWG_COMMENT2% Comment2
%DWG_COMMENT3% Comment3
%DWG_COMMENT4% Comment4
%DWG_CUSTOMER%Customer
%DWG_DRAWING_PAGE%Drawing page
If the part belongs to a group 
%GROUPNAME%Group name
%GROUPNOTE1%Comment 1
%GROUPNOTE2%Comment 2
%GROUPPOSNUM%Position number
%GROUPSENDNUM%Shipping number
%GROUPARTICLE%Article number
%GROUPCOUNT%Number of groups %GROUPTOTALCOUNT%Overall number
%GROUPFAMILYCLASS%Family class %GROUPWEIGHT%Group weight
%GROUPLENGTH%complete group length
%GROUPWIDTH%complete group width
%GROUPHEIGHT%complete group height
For all other objects (if available) 

%NAME%Name
%TRANSPORTNAMETransport name
%INTERNALNAME%Internal Name
%KEY%Shape key
%NOTE1%Comment1
%NOTE2%Comment2
%KATALOG%Catalogue
%POSNUM%Position number
%SENDNUM%Shipping number
%ORIGINALNUM%Original Position number
%ARTICEL%Article number
%HANDLE%
               AutoCAD™
             Handle
%STYLENAME%Name of detailing style
%MATERIAL%Material number
%COUNT%Quantity
%TOTALCOUNT%Total quantity
%PARTART%Part Type
%DISPLAYCLASS%Display class as number
%AREACLASS% Area class as number
%FAMILYCLASS% Family class as number
%PPSZPART%Marker for PPS output
%AREACLASSNAME%Area class 
%DISPLAYCLASSNAME%Display class
%FAMILYCLASSNAME%Family class
%SHAPECLASS%Shape class
%COLORINDEX%Object colour
%FREEDESCRIPTION%Additional description
%LENGTH%Length
%WIDE%Width
%HEIGTH%Height
%SLOPEDHEIGTH%Sloped height
%WEIGHT%Weight
%CUTAREA%Cut area
%PAINTAREA%Paint area
%LENADD%Additional length
%INSERTX%Insert offset X
%INSERTY%Insert offset Y
%SCALE%Scaling factor
%TENSION%Tension (bolt)
%DM%Diameter (bolt)
%KLEMMLEN%Clamp length (bolt)
%MOUNTINGBOLT%Bolt type
%ORIGIN%Point of insertion
%XAXIS%X-axis
%YAXIS%Y-axis
%ZAXIS%Z-axis
%GROUPREL%Group relevation
%MODIFYFLAG%Modify flag
Additional Lines Used for further need of writing additional text into the output file, as above.
Slotted Hole as Two Circles Ehen checked, a slotted hole is exported with two holes. A slotted hole display in DXF as two circles ?two arcs with two lines, instead of with one hole.
DXF Output as 2D When checked, exports the exported geometry as plane contour, in 2D. All z-coordinates of the geometry are reset to 0 at output.
Use arcs and lines of instead of Smartlines Enabled for DXF Output as 2D. Uses Arcs and Lines instead of Smartline, serves for division of Smartlines into arcs and lines at output.