Inserts are added to existing wall panels.
-
Key-in
PROCONCRETE ADD PANELINSERT to access the
GUID-F486A80F-9590-4323-A5C2-9C365C249AFF.html#GUID-F486A80F-9590-4323-A5C2-9C365C249AFF tool.
The Panel Insert dialog opens.
-
Select the
Item Type from the panel insert type drop-down
list.
-
Specify the
Insert Face from the drop-down list.
-
Set the value to
Horizontal and
Vertical Offset positions for respective
distribution patterns.
-
Click the
Cell (Browse) to specify a
Cell Path.
Note: You must have a
cell drawn for the insert before proceeding.
-
Select a cell to use as the insert.
-
On
Edge Insert tab, define the
Spacing for your inserts in the Horizontal
field. For example, 4*800 (four inserts at 800 mm)
-
Select
(Specify Point to
Place Insert).
-
On your model, click to select the panel, followed by a click to
select the insertion point on the panel.
The insert displays on your panel. Elements are
centered on the point you click, and spacing is distributed left to right.
-
Click
OK
.