| Type |
Displays the selected end condition. |
| Load |
Loads the default standard values for the current end condition type. |
| Pin Dia |
Diameter of the pin used to bend the bar. |
| Angle |
The bend angle. |
| Length |
The bend length. |
| Depth |
The offset dimension from the end of a crank to the main section of the bar. |
| Tail/Leg |
The tail/leg length. A tail/leg length is automatically calculated unless you manually enter a value. |
| Override Tail |
Check to enter a custom Tail Leg length. |
| Rotation |
To rotate the end condition, enter any angle. |
 Rotate End Condition |
Click to rotate all end conditions in 90 degree increments. |
