Pad Footing Reinforcement - Dowels tab
Used to detail optional dowel that extend from the footing pad into a column.
| Setting | Description |
|---|---|
| Create | When checked, adds dowel bars to the pad footing reinforcement. |
| Column | Used to define the column information for the dowel
bars.
 prompts
Select Pad footing, followed by
Select Column or
reset to quit selection. The above values are
populated when the column is selected.
|
| Dowels |
|
| Type | The following descriptions apply to all start and
end options.
Select the type of end condition for each position:
|
 Edit End Condition
Values
|
When you select an end condition type, the standard
values and angle are applied. If necessary, click
Edit End Condition Values
to enter custom end
condition settings.
|
| Hook Orientation | Select the alignment of the hooks where embedded in the footing. |
| Rotation | Type a rotation angle (in degrees). Click
 to rotate the bar by increments
of 90 degrees.
|
| Template Ties | Used to keep dowel bars in place. Multiple ties can
be added to the template tie table.
|
|
Adds a new line to the ties table and clears the controls in the editing area allowing a new template tie bar to be entered. |
|
Deletes the current line from the table. |
