Slab Features

Used to add falls, folds, polycuts, curbs, and notches to your slab.

• Ribbon: Concrete > Home > Concrete Placement > Slab > Add Slab Features

• the Add Slab Feature tool is selected in the PC Slabs group on the ProConcrete tab, or
• ProStructures > Concrete > Slabs > Add Slab Feature is selected, or
• the command PC_SLAB_TOOLS is entered.

Setting	Description
Fall	Depth1 ? Sets the fall depth. Depth2 ? Sets a second fall depth. Enabled for Uneven Fall. Create Fall by Smartline ? Creates a fall by selecting an existing smartline on the drawing. Creates a fall by selecting an existing Smartline on the drawing. Create Fall by Points ? Creates a fall by selecting points on the drawing.
Polycut	Create Polycut by Smartline ? Creates a polycut by selecting an existing smartline. Creates a polycut by selecting an existing Smartline. Create Polycut by Points ? Creates a polycut by clicking points on the drawing. Update reinforcement ? When checked, analyzes any effect of polycut on the reinforcement.
Fold	Height ? Sets the height of the fold. Offset ? Sets an offset value if required. Create Fold by Smartline ? Creates a fold based on an existing smartline. Creates a fold based on an existing polyline.
Curb/Notch	Width ? Sets the width of the curb or notch. Height ? Sets the height of the curb or notch. Create Curb ? Adds a curb to your slab. Create Full Notch on Edge ? Adds a full notch to your slab. Create Partial Notch on Edge ? Adds a partial notch to your slab.
OK	Closes the dialog and save your changes.
Cancel	Closes the dialog without saving changes.
Help	Opens online help.
Template	Saves and retrieve settings to be used on other projects.