Rebar Modification Ribbon Tab

Contains tools used for manipulating reinforcing bars and bar end conditions.

Table 1. Rebar group
Tool name Description


Edit Rebar 		Used to edit any existing individual rebar in any existing rebar cage.


Move Rebar 		Used to move a single bar or multiple bars contained in a rebar cage.


Copy Rebar 		Used to make a duplicate of an existing bar on your model.


Delete Rebar 		Used to delete individual bars or stirrups from a rebar cage.


Explode Rebar 		Used to break apart rebar cages into individual bars.


Stretch Rebar 		Used to stretch the selected rebar.


Trim Rebar 		Used to trim the selected rebar.


Extend Rebar 		Used to lengthen the selected rebar.


Break Rebar 		Used to break the selected rebar into two segments.


Lap/Splice Rebar 		Opens the Create Rebar Lap Splice dialog, which is used to create a lap splice at any given point of an existing piece of rebar or rebar cage.
Table 2. End Conditions group
Tool name Description


Edit Single Rebar 		Used to modify a rebar's end conditions.


Edit 		Opens the Edit End Condition dialog, which is used to apply a standard or user-defined end condition to an existing rebar.


Delete 		Used to delete the end condition on an selected bar.


Convert End Condition to Bent Bar 		Used to covert a single rebar or a rebarset End Condition to U bar using the Ctrl key.


Rotate End Condition 		Used to rotate the end condition of a selected bar by either 90? or a user-specified amount.


Align to Line 		Used to align a selected bar's end condition to a line (typically the edge of concrete).