NC Data - Data - Holes-BO tab

Setting	Description
Sort holes base on	Select the sorting order for holes in the output file from the drop-down list: Location Diameter Type Note: Sorting of hole is based on Location (Ascending X-Coordinate) OR Diameter (Smaller to bigger) OR Type (Sequence ? 1. Complete hole 2. Countersunk 3. Step hole 4. Marker hole 5. Blind hole). Default type: Location
Hole on Member Profile	Hole placement and alignment setting on selected member profile.
Profile Code	Select the profile for which you want to change the placement and alignment settings.
Reset	Resets the hole placement and alignment setting of selected profile to default (i.e., according to DSTV specification).
Hole Placement	Used to report the only complete (through) hole placement from the selected web or flange faces. Report web holes from ? Select the web face from which you want to report the hole information. Note: The list options change based on the profile selection. This option is only applicable when the shape has one web with two faces (i.e., web of an `I` profile). Report flange hole from ? Select the flange face from which you want tor report the hole information. Note: The list options change based on the profile selection. This option is only applicable when the shape has one flange with two faces (i.e., web of an `L` profile). Holes that are drilled within the AK boundaries are only reported in the BO Block.
Hole Alignment	Used to set the hole alignment for the top flange, web, and bottom flange using the selected options. The output file will be generated according to hole alignment selection.
Top flange / Web / Bottom flange	Reports the hole alignment for the section element per the selection. The output file with be generated according to the hole alignment selection. Top of flange ? Reports the hole alignment for top flange as per the selection in combo box. Default value: Centerline (for `L profile`). Web ? Reports the hole alignment for web as per the selection in combo box. Default value: Top of flange (for `I profile`). Bottom of flange ? Reports the hole alignment for bottom flange as per the selection in combo box. Default value: Centerline (for `L profile`).
Reset All	Resets all control to default values (i.e., according to DSTV specification).

Sort holes base on

Select the sorting order for holes in the output file from the drop-down list:

Location
Diameter
Type

Note: Sorting of hole is based on Location (Ascending X-Coordinate) OR Diameter (Smaller to bigger) OR Type (Sequence ? 1. Complete hole 2. Countersunk 3. Step hole 4. Marker hole 5. Blind hole).

Default type: Location

Hole on Member Profile

Hole placement and alignment setting on selected member profile.

Profile Code

Select the profile for which you want to change the placement and alignment settings.

Reset

Resets the hole placement and alignment setting of selected profile to default (i.e., according to DSTV specification).

Hole Placement

Used to report the only complete (through) hole placement from the selected web or flange faces.

Report web holes from ? Select the web face from which you want to report the hole information.
Note: The list options change based on the profile selection. This option is only applicable when the shape has one web with two faces (i.e., web of an I profile).
Report flange hole from ? Select the flange face from which you want tor report the hole information.
Note: The list options change based on the profile selection. This option is only applicable when the shape has one flange with two faces (i.e., web of an L profile).

Holes that are drilled within the AK boundaries are only reported in the BO Block.

Hole Alignment

Used to set the hole alignment for the top flange, web, and bottom flange using the selected options. The output file will be generated according to hole alignment selection.

Top flange / Web / Bottom flange

Reports the hole alignment for the section element per the selection. The output file with be generated according to the hole alignment selection.

Top of flange ? Reports the hole alignment for top flange as per the selection in combo box. Default value: Centerline (for L profile).
Web ? Reports the hole alignment for web as per the selection in combo box. Default value: Top of flange (for I profile).
Bottom of flange ? Reports the hole alignment for bottom flange as per the selection in combo box. Default value: Centerline (for L profile).

Reset All

Resets all control to default values (i.e., according to DSTV specification).