Rebar Modification Ribbon Tab
Contains tools used for manipulating reinforcing bars and bar end conditions.
Tool name | Description |
---|---|
Edit Rebar |
Used to edit any existing individual rebar in any existing rebar cage. |
Move Rebar |
Used to move a single bar or multiple bars contained in a rebar cage. |
Copy Rebar |
Used to make a duplicate of an existing bar on your model. |
Delete Rebar |
Used to delete individual bars or stirrups from a rebar cage. |
Explode Rebar |
Used to break apart rebar cages into individual bars. |
Stretch Rebar |
Used to stretch the selected rebar. |
Trim Rebar |
Used to trim the selected rebar. |
Extend Rebar |
Used to lengthen the selected rebar. |
Break Rebar |
Used to break the selected rebar into two segments. |
Lap/Splice Rebar |
Opens the Create Rebar Lap Splice dialog, which is used to create a lap splice at any given point of an existing piece of rebar or rebar cage. |
Tool name | Description |
---|---|
Edit Single Rebar |
Used to modify a rebar's end conditions. |
Edit |
Opens the Edit End Condition dialog, which is used to apply a standard or user-defined end condition to an existing rebar. |
Delete |
Used to delete the end condition on an selected bar. |
Convert End Condition to Bent Bar |
Used to covert a single rebar or a rebarset End Condition to U bar using the <Ctrl> key. |
Rotate End Condition |
Used to rotate the end condition of a selected bar by either 90° or a user-specified amount. |
Align to Line |
Used to align a selected bar's end condition to a line (typically the edge of concrete). |