Place Wingwall tool
Used to place wingwall templates on abutments.
Tool Settings
Setting | Description | ||||||
---|---|---|---|---|---|---|---|
Place Left / Right Wingwall | Check the option for each side of the abutment (station ahead) where a wingwall is to be placed. | ||||||
Template Name | Click […] to open the Template Selection dialog, which is used to select a wingwall template from the wingwall template library. Click Select to use the selected template. | ||||||
Orientation | Select how this wingwall is placed with respect to
the abutment:
|
||||||
Vertical Offset | Vertical distance from the abutment to the top of the wingwall. A positive number results in the top of wingwall above the top of the associated abutment. A negative number pushes the wingwall top below the abutment top. | ||||||
Align With Abutment | Check this option to align the outside face of the abutment to the outside face of the wingwall. | ||||||
Longitudinal / Horizontal Offset | Type an offset from the end of the abutment to the wingwall. | ||||||
Skew Angle | Type a skew angle to use to rotate the wing wall with respect to the abutment orientation. | ||||||
Adjust Height to Backwall | Select this option to adjust the height of the wingwall to match the abutment backwall. | ||||||
Compute Length | (Normal/Skewed wingwall) Set this option and specify the Fill Slope, Berm Horizontal Offset, Berm Vertical Offset, and Length Extension. | ||||||
Material group | Select the material to use for object components by selecting the associated […] button and then selecting the material from the Material Library dialog. | ||||||
Build Order group | Assign a build order (ordinal integer) to each object component in this group to specify construction order. | ||||||
Feature group |
|