Bridge Wizard dialog
Allows users to quickly create complete bridge models by entering just a few inputs. Models can then be adjusted or modified using other OBM tools. Found on the Home ribbon tab in the Bridge Setup group.
Tool Settings
Setting | Description |
---|---|
Bridge name | Unique name for bridge to be created |
Alignment | Pick interactively from dgn file or use the option to create a default alignment |
Bridge Type | Select from list of supported bridge types |
Deck Template | Select from list. New Templates can be added under Utilities > Libraries |
Spans | Input span lengths as
Or
|
Beam Spacing | RS S1 S2 … where RS is spacing from deck edge and S1
S2 are beam spacings
Or NumberOfBeams@S1 -Example: 5@6.5 will place 5 beams at 6.5 ft spacing. Edge distances will be computed symmetrically based on deck template width. |
Setting | Description |
---|---|
Beam Template | Select from list. New Templates can be added under Utilities > Libraries |
Built-Up Beam | If Bridge type is Steel girder, input the Web and Flange dimensions. Both top and bottom flanges are assumed to be the same dimensions. |
Abutment Template | Select from list. New Templates can be added under Utilities > Libraries |
Pier Template | Select from list. New Templates can be added under Utilities > Libraries |
Left Barrier Template | Check the box and select from List. |
Left Barrier Template | Check the box and select from List. |
Bridge Start Station | Input Bridge Start Station, or if picking alignment, use cursor to click interactively and select station on the picked alignment. |
Setting | Description |
---|---|
Alignment Advanced Options | Specify additional parameters like X, Y, Z , start Tangent direction, radius and hand to generate either straight or circular simple starter alignments. |
Custom Deck | If this option is selected, specify deck width and deck thickness in master units, rather than selecting a predefined template. |
Support Skew Angles | Specify SupportLine skew angles for one or more supports. |
On the Materials tab, you can specify material properties for various bridge components. The materials come from the Material library, and include both cost and structural properties.