Standard End Condition
|
-
Create Standard Bend – Changes the
current end condition to a standard bend (90 degree hook).
-
Create Standard Hook
– Changes the current end condition to a standard
hook (180 degree hook).
-
Standard 90 Degree Hook – Similar to
standard bend, but with the angle set at 90°.
-
Standard 135 Degree Hook – Similar to
standard bend, but with the angle set at 135°.
-
Standard 135 Degree Seismic Hook –
Similar to standard 135° hook, but with the lengths specified for seismic
detailing.
-
Standard 180 Degree Hook – Similar to a
Bend, but with the angle set at 180°. Or, a hook with a single bend.
-
Create Standard Crank – Changes the
current end condition to a standard crank (offset bar).
-
Create Standard Projection – Changes the
current end condition to a standard projection.
|
User Defined End
|
When you select any of the following user-defined
end condition options, the
Rebar End Properties opens, allowing you to change
dimensions and angles for the end condition. icons in dialog differ:
-
Create User-defined Bend
– Changes the current end condition to a
user-defined bend (90 degree hook).
-
Create User-defined Hook
– Changes the current end condition to a
user-defined hook (180 degree hook).
-
User-derined 90 Degree Hook – Changes
the current end condition to a user-defined 90 degree hook.
-
User-derined 135 Degree Hook – Changes
the current end condition to a user-defined 135 degree hook.
-
User-derined 135 Degree Seismic Hook –
Changes the current end condition to a user-defined 135 degree hook with the
lengths specified for seismic detailing.
-
User-derined 180 Degree Hook – Changes
the current end condition to a user-defined 180 degree hook.
-
Create User-defined Crank
– Changes the current end condition to a
user-defined crank (offset bar).
-
Create User-defined Projection
– Changes the current end condition to a
user-defined projection.
-
Create User-defined End Condition
– Changes the current end condition to a
user-defined double-bend style.
|
Apply To group
|
- Select
Rule – Apply end condition to Individual Level bars (apply to one
bar at at time) or Zone Level (apply to all bars in the top, bottom, left, or
right zones of a cage).
- Both Ends
– Check to apply the same end condition to both
ends of the selected bar(s).
|
OK
|
Closes the dialog and save your changes.
|
Cancel
|
Closes the dialog without saving changes.
|
Help
|
Opens online help.
|
Template
|
Saves and retrieve (Using Templates) settings to be used on other
projects.
|