Section Dimensions - Rectangular columns
|
Used to set the rectangular column section dimensions separately
for both
Long Face and
Short Face. However, the inputs are
identical for both.
|
Section Dimensions group - Circular columns
|
- Diameter – Sets
the diameter of the selected column.
- Bar
Quantity
– Sets the number of bars in the round rebar cage.
- Clearance
– Sets the clear spacing between the face of the
column and the outermost bar (main bar or stirrup).
- Select Active Column
– Used to select the active column from the model. If the selected column is
rectangular, then the dialog inputs are updated.
|
Lift Dimensions
|
- Offset
– Horizontal distance from the face of the active
column to the face of the column above. Can either be typed in or automatically
calculated if the user picks the column above.
- Top
Elevation – Top elevation of the active column. Display only and
filled in automatically when the active column is selected.
- Top
Clearance – Sets the distance from the top of the column to the top
end of the reinforcing cage.
- Bottom
Clearance – Sets the distance from the bottom of the column to the
bottom end of the reinforcing cage.
- Bottom
Elevation
– Displays the bottom elevation of the active
column. Filled in automatically when the active column is selected.
- Floor
Thickness
– Sets the thickness of the floor above. Can
either be typed in or automatically calculated if the user picks the floor
above.
- Height –
Displays the height of the active column. Filled in automatically when the
active column is selected.
|