Left Beam
|
Opens the
Left Beam dialog, which is used to select
the beam to the
"left" of the current beam for which you are
defining reinforcement. This is used to detail reinforcement extending to this
beam.
Alternately, you can directly specify the
X-Dist value.
|
Left X-Dist
|
Sets the distance between centerline of the left
support and the face of the supporting member.
|
Right Beam
|
Opens the
Right Beam dialog, which is used to
select the beam to the
"right" of the current beam for which you are
defining reinforcement. This is used to detail reinforcement extending to this
beam.
Note: The
Right Beam dialog is similar to the one
above shown for Left Beam.
Alternately, you can directly specify the
X-Dist value.
|
Right X-Dist
|
Set the distance between centerline of the right
support and the face of the supporting member.
|
|
Used to select the concrete members for the beam,
left supporting member, and right supporting member. The Left column, the beam
and the Right Column, respectively.
|
Width / Depth / Left Support / Right Support / Clear
Span / Grid to Grid
|
These dimensions are calculated from the referenced
Left Beam, Left Support, Current Beam, Right Support, and Right Beam.
|