Concrete Cover
|
Sets the concrete clear cover for the Near Face, Far
Face, and Side.
- Centered – When
checked, centers the rebar inside the panel/slab shape
rather than placing it close to the panel's face. Use the
Near RebarSet to define the centered
rebarset.
|
Near RebarSet / Far RebarSet
|
Define the Rebar used in both the
Horizontal and
Vertical directions for this RebarSet (layer
of reinforcement). When checked, enables adding horizontal / vertical bars.
- – Swaps parameters between the
Horizontal and
Vertical directions.
- Bar
Size – Sets the bar size (and steel grade) selected from the
drop-down list.
- Layout – Sets
how the series of bars is aligned from the list. See
Understanding Spacings.
- Spacing
Description – When checked, enables setting in variable spacing
values -the formula that defines the spacing between rebar. See
Understanding Spacings.
- Spacing
– Sets the regular distance between consecutive
bars.
- Start /
End Offset – Sets the distance from the end of the rebar to the
edge of your concrete shape.
- Outer
(Above)
– When checked, sets the bars closest to the outer
edge of the shape: toggles between horizontal or vertical.
|