| Standard Stiffener
|
When checked, a standard stiffener will be created on the other
side of the web if there is only one connecting shape selected.
Note: Activated when you have only one connecting shape and one
support shape.
- Stiffener
Type – Creates stiffener plate of selected type: Chamfered,
Rounded, or Filleted.
- Flange
Offset – Sets the distance from stiffener edge to flange of the
support shape.
- Web
Offset – Sets the distance from stiffener edge to web of the
support shape.
- End
Offset – Sets the distance from stiffener end to support shape
edge.
- Thickness –
Sets the thickness of the stiffener plate.
- Radius – Sets
the stiffener fillet radius or chamfer size.
|
