The RevisionCenter interface
In general terms, the RevisionCenter is, like the DetailCenter, broken down into three work levels. However, they differ in terms of their relevance, so you do not always need to work with all three levels.
Level 1: The document overview
This page gives you an overview of all the documents generated based on the model. Here you will find your 2D drawings, parts lists and, for example, NC files. There is also a summary of the version history and the creation data for a document, and you can access earlier versions of documents.
If you wish to completely update a document or give it a new file name, you can do it here.
Level 2: The component overview
This gives you an overview of the parts in your model, and of their functional relationships. It shows groups, individual parts and whole areas of the model. This overview is identical to that in the DetailCenter, but goes further by displaying the modifications.
It shows a component’s version history, i.e. which changes have been made to the component at what time. As in the DetailCenter, you can also update a modified component here on the workshop drawing.
Level 3: The conflict overview
This page is used to control and avoid errors and is an important stopping-off point prior to any update.If you have positioned components and added their detail blocks to 2D drawings, an inserted component often represents all the same position numbers. If changes are made and repositionings follow, a simple update is often not enough. This helps you see whether other components need to be detailed and whether you have any positioning errors, and helps you to find the solution.