| Concrete Cover
|
Sets the concrete clear cover for the Vertical
Offset, Side, and Centered.
- Vertical
Offset – Select the vertical offset distance from the list.
- Side – Select
the clear cover along the sides of the RebarSet.
- Centered – Set
this option to center the RebarSet in through the depth of the selected
concrete element.
|
| Insert
|
Sets the insert method:
- By
Defined/Selected Smartline
- By
Concrete
|
| Single Rebarset
|
Define the Rebar used in both the
Horizontal and
Vertical directions for this RebarSet (layer
of reinforcement). Checked, by default.
 – Switches the rebar parameters
between sides of the RebarSet.
- Bar
Size – Sets the bar size (and steel grade) in this direction
selected from the drop-down list.
- Layout – Sets
how the series of bars is aligned from the list. See
Understanding Spacings.
- Spacing
Description – When checked, enables setting in variable spacing
values -the formula that defines the spacing between rebar. See
Understanding Spacings.
- Spacing
– Sets the regular center-to-center distance
between consecutive bars.
- Start /
End Offset – Sets the distance from the end of the rebar to the
edge of your concrete shape.
- Below
(Above)
– When checked, sets the direction of bars which
are located nearest the face or
Above the other for
Centered bars.
|
