Use to set the
number and distances of the holes on the cleat plate along the direction of the
connecting shape and along the Y-Axis of the connecting shape.
| Setting | Description |
|---|
| Hole Horizontal
|
- Count – Sets
the number of the holes in the direction of the connecting shape. Default is 1.
- Distance – Sets
the distance between two adjacent holes in the direction of the connecting
shape. Default is 40 or 1.6 depending of the units setting.
- Gap
Distance – Sets the distance between edge of the web and the center
of the first hole along the direction of connecting shape. Default is 30 or 1.2
depending of the units setting.
- Edge
Distance – Sets the distance between the edge of the cleat plate
and the center of the first hole along the direction of connect shape. Default
is 30 or 1.2 depending of the units setting.
|
| Hole Vertical
|
- Count – Sets
the number of the holes in the direction of Y-Axis of the connecting shape.
Default is 4.
- Distance – Sets
the distance between two adjacent holes along the direction of Y-Axis of the
connecting shape. Default is 40 or 1.6 depending of the units setting.
- Edge
Distance – Sets the distance between the edge of the cleat plate
and the center of the first hole on the cleat along the direction of Y-Axis of
the connecting shape. Default is 30 or 1.2 depending of the units setting.
- Diameter – Sets
the diameter of the hole. Default is 16 or 0.6 depending of the units setting.
- WorkLoose –
Sets the workloose of the hole. Default is 1 or 0.04 depending of the units
setting.
|
