Standard Handrail - Filler Rod tab

Setting	Description
Min. Post Space Btwn	Sets the minimum post spacing distance between which filler rod should be included. Post spacings less that this value will not have filler rods inserted between them.
Edge Distance	Sets the distance from the post to the first filler rod.
Distance Between	Sets the center-to-center distance between adjacent filler rods.
Top Offset	Sets the start offset for the filler rod.
Bottom Offset	Sets the end offset for the filler rod
Side Offset	Sets the side offset for the filler rod.
Insert Position	Sets the position of filler rod placement with respect to the horizontal rails: Back Center Front
Insert From / Insert To	Sets the element selected for the horizontal rail shapes for the top and bottom of the filler rod ends.
Cut At	Select the location in the Insert From and Insert To shapes at which the filler rod edge is cut: Outer Edge Inner Edge Center
Collision Type	Sets the method used for collision type when a filler rod collides with a horizontal rail: Ignore – Makes no change to either the filler rods or the horizontal rails. Divide – Cuts the filler rods shapes above and below the horizontal rails. Drill Through – Removes the holes from the horizontal rail element to accommodate the filler rods. Boolean operation – Makes boolean operations to the filler rod and not to the rails. Divide and boolean operation – Performs the divide operation and processes any single rod with a boolean operation to the rails (modifying the rods).
Drill Clearance	Enabled for Drill Through and Booleans ops collision type. Sets the side offset clearance for the filler rods.
Straight Cut at Edge	Set this option to specify a straight cut at collision ends of a filler rod (or filler rod segment in the case of dividing at a horizontal rail collision).

Min. Post Space Btwn

Sets the minimum post spacing distance between which filler rod should be included. Post spacings less that this value will not have filler rods inserted between them.

Edge Distance

Sets the distance from the post to the first filler rod.

Distance Between

Sets the center-to-center distance between adjacent filler rods.

Top Offset

Sets the start offset for the filler rod.

Bottom Offset

Sets the end offset for the filler rod

Side Offset

Sets the side offset for the filler rod.

Insert Position

Sets the position of filler rod placement with respect to the horizontal rails:

Back
Center
Front

Insert From / Insert To

Sets the element selected for the horizontal rail shapes for the top and bottom of the filler rod ends.

Cut At

Select the location in the Insert From and Insert To shapes at which the filler rod edge is cut:

Outer Edge
Inner Edge
Center

Collision Type

Sets the method used for collision type when a filler rod collides with a horizontal rail:

Ignore – Makes no change to either the filler rods or the horizontal rails.
Divide – Cuts the filler rods shapes above and below the horizontal rails.
Drill Through – Removes the holes from the horizontal rail element to accommodate the filler rods.
Boolean operation – Makes boolean operations to the filler rod and not to the rails.
Divide and boolean operation – Performs the divide operation and processes any single rod with a boolean operation to the rails (modifying the rods).

Drill Clearance

Enabled for Drill Through and Booleans ops collision type. Sets the side offset clearance for the filler rods.

Straight Cut at Edge

Set this option to specify a straight cut at collision ends of a filler rod (or filler rod segment in the case of dividing at a horizontal rail collision).