At single sheet output, a drawing list is automatically created as text file (*.txt) and as DBASE-file (*.dbf). The file is saved in the ProSteel detail folder under the drawing name of the model.

You can see the position of the corresponding part and the file name of the created drawing in this file. The drawing number, scale (and whether it is suitable) and drawing frame are displayed as well. The data depend on the selected type of single sheet output.

DetailCenter Express! drawing list
----------------------------------
 
Output date:  13.09.2007
Output path:d:\ps18.0\detail
Output mode:Best scale
Job number: 
Model drawing: e:\dwg\halle.dwg
 
 
1.) created group drawings
 
Pos |Scale |Max |Dwg-Number   |Dwg-File 
====|======|====|=============|==========
100 |1:50  |Max |DWG-A3-Bl.7  |BG100.dwg 
101 |1:50  |Max |DWG-A3-Bl.23 |BG101.dwg 
103 |1:15  |    |DWG-A3-Bl.20 |BG103.dwg 
104 |1:10  |    |DWG-A3-Bl.4  |BG104.dwg 
105 |1:15  |    |DWG-A3-Bl.18 |BG105.dwg 
 
 
2.) created single part drawings
 
Pos |Scale |Max |Dwg-Number   |Dwg-File 
====|======|====|=============|==========
1   |1:50  |Max |DWG-A4-Bl.6  |Pos1.dwg 
2   |1:50  |Max |DWG-A4-Bl.22 |Pos2.dwg 
5   |1:10  |    |DWG-A4-Bl.3  |Pos5.dwg 
6   |1:50  |Max |DWG-A4-Bl.17 |Pos6.dwg 
7   |1:5   |    |DWG-A4-Bl.16 |Pos7.dwg 
8   |1:10  |    |DWG-A4-Bl.14 |Pos8.dwg 
12  |1:10  |    |DWG-A4-Bl.8  |Pos12.dwg 
14  |1:5   |    |DWG-A4-Bl.1  |Pos14.dwg 
15  |1:2.5 |    |DWG-A4-Bl.21 |Pos15.dwg 
16  |1:2.5 |    |DWG-A4-Bl.2  |Pos16.dwg