Station Offset Report

Used to create a report that contains station offset data for selected horizontal geometry elements.

You can access this tool from the following:

Ribbon: Geometry > General Tools > Reports split button

This tool creates a report that contains station offset data for selected horizontal geometry elements. Offsets are always measured perpendicular from the base element to the offset element. The reported stationing is measured along the offset element. Offsets are given for cardinal points on the base (non-offset) element.

Interval (optional) defines the distance along the offset element between each measurement of offset. A value of zero has no effect.

Offset (optional) causes offset distances to be measured to a point that is not directly on the offset element but rather is offset by the distance specified. A value of zero has no effect.

Workflow

Select the Station Offset Report tool from the Analysis and Reporting tool group.
Define optional Interval or Offset in the Tool Settings.
Follow the heads-up prompts:

Prompt	User Action
Locate Element	Select a civil horizontal geometry element.
Locate First Offset Element	Select the civil horizontal geometry element to compute offsets.
Locate Next Offset Element - Reset to Complete	Continue selecting elements. Once all elements are selected, click RESET to generate the report.

4. After the last prompt is completed, the Civil Report browser opens with the generated report. Note your report may look different depending on what report is selected as the default. See the Civil Report Browser for printing, etcetera.