| Bolts Longitudinal
|
- Number
– Sets the number of bolts in horizontal
direction.
- Edge
Distance Outside – Sets the projection of the splices beyond the
last bolt.
- Edge
Distance Inside – Sets the distance from the starting point of the
shape to the first bolt.
- Distance – Sets
the inner distance from one bolt to the other.
|
| Bolts Transverse
|
- Number – Sets
the number of bolts transversal to the shape direction.
- Edge
Distance Outside – Sets the distance of the plate beyond the
outmost bolts.
- Edge
Distance Inside – Sets the distance from one bolt to the other.
- Distance – For
more than 2 bolts in transversal direction, this value sets the distance from
one outer bolt to the other.
|
| Plate
|
- Thickness –
Sets the splice plate thickness from the drop-down list.
- Vertical
Offset – Sets offset of the plate to the shape center. The offset
moves the splices in transversal direction to the shape.
|
| Welding
|
Sets the joint plates.
- Welding – When
checked, no bolts and drill holes will be inserted, but the parts will be
welded with each other. Length settings are still valid.
- Length – Sets
the length of the splice to be welded.
- As – Sets the
desired value for the weld thickness, overriding the default weld style
thickness.
- Weld
Style – Displays the weld style to be used, one selected from the
drop-down list.
|
