| T-Shape
|
- Shape
Class – Sets the type of shape. Default is
DIN_T.
- Shape
Size – Sets the size of the shape. Default is
T20.
- Length – Sets
the length of the shape. A positive value determines the length . A negative
value is read as its absolute value. A value of zero sets the length to match
the width of the connect shape. The default is 0.
|
| Weld Plate
|
- Length – Sets
the weld plate length. A positive value determines the length. A negative value
is read as its absolute value. A value of zero sets a length to match the width
of the connect shape. The default is 0.
- Width – Sets
the width for the weld plate. A positive value determines the width. A negative
value is read as its absolute value. The default is 25 or 1 depending on the
units setting.
- Thickness –
Sets the thickness for the weld plate. A positive value determines the
thickness. A negative value is read as its absolute value. A value of 0 is not
permitted. The default is 5 or 0.2 depending on the units setting.
|
| Support Base
|
- Width – Sets
the base plate dimension in the direction of the connect shape. A positive
value determines the width. A negative value is read as its absolute value. The
default is 50 or 2 depending on the units setting.
- Base
Thickness – Sets the base plate thickness. A positive value
determines the thickness. A negative value is read as its absolute value. The
default is 5 or 0.2 depending on the units setting.
- Support
Height – Sets the height of the support plate. A positive value
determines the height. A negative value is read as its absolute value. The
default is 150 or 6 depending on the units setting.
- Chamfer X
/ Chamfer Y – Sets the dimensions of the chamfer on the
lower corner of the support plate, in
X and Y direction respectively. A positive value determines the chamfer size. A
negative value is read as its absolute value. A value of 0 for either
Chamfer X or
Chamfer Y indicates no chamfer is to be
created. The default is 20 and 80 or 0.8 and 3.2 depending on the units
setting.
- Chamfer – Sets
the dimension of the chamfer on the
upper corner of the support plate. A
positive value determines the chamfer size. A negative value is read as its
absolute value. The default is 10 or 0.4 depending on the units setting.
- Support
Thickness – Sets the support plate thickness. A positive value
determines the thickness. A negative value is read as its absolute value. The
default is 5 or 0.2 depending on the units setting.
|
