| Values
|
- Upper
Seat – When checked, inserts an upper seat.
- Lower
Seat – When checked, inserts an lower seat.
- Catalog – Sets
the shape Catalog to be used for the Seat.
- Section – Sets
the shape Section to be used for the connection.
- End
Offset – Sets the distance from the end point of the beam to the
first seat hole.
- Inverse
Angles – When checked, inverts the X-Y of the Angle Shape. Only
applicable with Uneven Angles.
- Use Beam
1 End Point / Beam 2 End Point – When checked, sets the end point
of beam 1 / beam 2 to be the work point for placing the clip angle.
|
| Bolts
|
- Bolt
Type – Sets the bolt style from the drop-down list.
- Dia. – Sets the
hole diameter of the selected bolt from the drop-down list of bolt diameter
table.
- Workloose –
Sets the clearance between bolt and hole diameter.
- Additional
Length – Sets additional length to the bolts extension outside the
nut.
- Material – Sets
the bolt material, selected from the predefined material list.
- Weld to
Plate / Weld to Beam – When checked, the shapes are welded to plate
/ welded to beam.
Note: When both set to Weld, disables the Bolts and Spacing
settings.
- Turn – When
checked, the bolt direction is inverted. Available when not welded.
|
| Longitudinal Spacing
|
- Number – Sets
the number of bolts to be placed on the X axis.
- Slot
Length – Sets the slot length.
- Edge
Distance (w1) – Sets the distance from the starting edge to the
center of the first bolt.
- Edge
Distance (w2) – Sets the distance from the ending edge to the
center of the first bolt.
- Distance
Btw. (w3) – Sets the distance between the center of the bolts.
|
| X Transverse Spacing / Y Transverse Spacing
|
Settings for both X and Y transverse spacings:
- Number of
Bolts – Sets the number of transverse bolts.
- Edge
Distance (e1) – Sets both edge distances.
- Distance
Btw. (e2) – Sets the distance between the center of the bolts.
|
