| Brace Plate
|
- Clear
between face of seal and tie plate – Sets the clearance distance
between seal and tie plate.
- Additional
Width – Sets the added width for plate.
- Additional
Multiplier – When checked, the multiplied width is considered.
- Thickness –
Sets the seal plate thickness. You can also pick one from the list.
- Chamfer – Sets
chamfer dimension.
- Embedded
Length – Set the length embedded to the plate.
- Embedded
Multiplier – When checked, the multiplier is taken in computing of
embedded length.
- Slot
Gap –
|
| Seal Plate
|
When checked, enables seal plate settings:
- Thickness –
Sets the seal plate thickness. You can also pick one from the list.
- Additional
Diameter/Width – Sets the seal plate dia or width.
- Additional
Multiplier – When checked, the multiplied width/dia is considered.
- Insert
Gap – Sets the distance from the inner most point of the notch to
the start of the plate.
|
