| Bolts
|
- Create
Bolts – When checked, enables creating bolts.
- Flip
Bolts – When checked, created bolts are flipped.
- Bolt
Style – Sets the bolt type from the installed bolt database's.
Select the required bolt type from the list. The default is
DIN 7991.
- Diameter – Sets
the diameter of the holes in the clamp plates. A positive value determines the
diameter. A previous value is used for the diameter if a zero value is entered.
The default is 16 and 1 or 0.6 and 0.05 depending on the units setting
- Workloose –
Sets the allowance for the hole workloose for the hole. This is the tolerance
between hole diameter and bolt diameter. A positive value determines the
workloose. A zero value is not permitted.
|
