Beam Column Web Connection - Stiffener tab
Used to set web
stiffeners.
| Setting | Description |
|---|---|
| Create | When checked, creates standard web stiffeners on the other side of the web of the selected column shape. |
| Stiffener Type | Sets chamfer type from the drop-down list; Chamfered, Rounded, or Filleted. |
| Flange Offset | Sets the offset of the stiffener from flanges of the shape. The default is 1 or 0.04 depending on the units setting. |
| Web Offset | Sets the offset of the stiffener from web of the shape. The default is 0. |
| End Offset | Sets the offset of the stiffener from out edge of the shape. The default is 1 or 0.04 depending on the units setting. |
| Plate Thickness | Sets the web stiffener thickness. The default is 6 or 0.24 depending on the units setting. A zero value is not permitted. |
| Radius | Sets the round radius of corners of the stiffener. A positive value determines the radius. A negative value is to be read as its absolute value. A zero value is not permitted. The default is 5 or 0.2 depending on the units setting. |