Pipe Strap Connection - Cleat tab

Used to set plate dimensions and holes on the end plate.

Setting	Description
Dimensions (Rounded Bar)	Bar Spacing – Sets the distance between two bars. A positive value determines the spacing. A negative value is to be read as its absolute value. The default is 100 or 4 depending on the units setting. Fit Bar – When checked, sets the Bar Spacing equal to fit the space between support pipe and the end plate. Bar Length – Sets the length of the bar. A positive value determines the length. A negative value is to be read as its absolute value. The default is 200 or 8 depending on the units setting. Shape Type – Sets the strap type selected from the drop-down list of types of installed shape database. The default is the `DIN_RUNDSTAH`. Shape Size – Sets the strap size for the current shape type, selected from the drop-down list. The default is the `RD16`.
Dimensions (Curved Cleat)	Cleat Width – Sets the width for the cleat plates. A positive value determines the width. A negative value is to be read as its absolute value. The default is 150 or 6 depending on the units setting. Cleat Thickness – Sets the thickness for the cleat plates. A positive value determines the thickness. A negative value is to be read as its absolute value. The default is 10 or 0.5 depending on the units setting.

Setting

Description

Dimensions (Rounded Bar)

Bar Spacing – Sets the distance between two bars. A positive value determines the spacing. A negative value is to be read as its absolute value. The default is 100 or 4 depending on the units setting.
- Fit Bar – When checked, sets the Bar Spacing equal to fit the space between support pipe and the end plate.
Bar Length – Sets the length of the bar. A positive value determines the length. A negative value is to be read as its absolute value. The default is 200 or 8 depending on the units setting.
Shape Type – Sets the strap type selected from the drop-down list of types of installed shape database. The default is the DIN_RUNDSTAH.
Shape Size – Sets the strap size for the current shape type, selected from the drop-down list. The default is the RD16.

Dimensions (Curved Cleat)

Cleat Width – Sets the width for the cleat plates. A positive value determines the width. A negative value is to be read as its absolute value. The default is 150 or 6 depending on the units setting.
Cleat Thickness – Sets the thickness for the cleat plates. A positive value determines the thickness. A negative value is to be read as its absolute value. The default is 10 or 0.5 depending on the units setting.

Note: Selecting the cleat type None, sets no cleat.