| (Distance List)
|
Displays the list of distances per bolt diameter.
- Bolt
Dia – The diameter of the connect bolt.
- Edge-
1st
Hole – Distance of the outermost hole
axis in the bracing rod to the rod front edge.
- Hole –
Hole – Spacing of the hole axes in longitudinal direction.
- nthHole
– Edge – Spacing of the outermost hole axis in the gusset.
You can directly click on the corresponding entries and the
processing mode will be switched on. Then you can double-click and directly
enter the value.
|
| Edge distance to borderline
|
Sets the desired distance of the bracing rods to the
limit edges. This is the minimum distance between bracing rods and the selected
border edges.
|
| Bracing rod shortening
|
Sets the value by which the bracing rod has to be
shortened in the middle after its insertion. Thus, the rod will be kept in
tension.
|
